Journal Search Engine
Download PDF Export Citation PMC Previewer
ISSN : 1225-5009(Print)
ISSN : 2287-772X(Online)
Flower Research Journal Vol.29 No.4 pp.232-238
DOI : https://doi.org/10.11623/frj.2021.29.4.03

Electrical Conductivity Changes in Nutrient Solution at Cymbidium ‘Lovely Smile’ Improved Flower Quality

Myung Syun Shim, Ah Ram Cho, Yoon Jin Kim*
Department of Horticulture, Biotechnology and Landscape Architecture, Seoul Women’s University, Seoul 01797, Korea


* Corresponding author: Yoon Jin Kim Tel: +82-2-970-5620 E-mail:
yj1082@swu.ac.kr
02/09/2021 30/09/2021 01/10/2021

Abstract


Cymbidium is one of the most popular and economically important species cultivated as a commercial ornamental crop. The objectives of this study were to determine the appropriate electrical conductivity (EC) treatments of nutrient solution, which gives the highest spike production and quality. Three-year-old Cymbidium ‘Lovely Smile’ plants were grown in the environmentally controlled Information and Communication Technology (ICT) smart greenhouse at Seoul Women’s University. The EC of the nutrient solution was changed in three distinct stages: vegetative, flower initiation, and flower development. The EC treatments were 1-0-1 (dS·m-1, EC101), 1-1-1 (dS·m-1, EC111), 2-1-2 (dS·m-1, EC212), 2-2-2 (dS·m-1, EC222), 3-2-3 (dS·m-1, EC323), 3-3-3 (dS·m-1, EC333) and the pH was adjusted to 6.0–6.5. Pseudobulb diameter increased in the plants treated with EC 101 and EC111 compared to the plants treated with EC 2.0–3.0 dS·m-1 at the reproductive stage 28 weeks after nutrient solution treatment. Flower spike production per pot and pseudobulb showed the highest values in the plants treated with EC111 of 3.3 and 1.4, respectively. Flower spikes length was the highest in the plants treated with EC 1.0 dS·m-1 and stem thickness, number of flowers, and fresh weight were the largest in the plants with EC 1.0 dS·m-1 among the EC treatments. Flower spikes had the worst quality (e.g., plant growth and flowering quality) in the plants treated with EC 3.0 dS·m-1 among the EC treatments. Floral bud and flower development took place 1–2 weeks earlier in the plants treated with EC 101, 111, and 212 than the other treatments. Flower diameter showed the highest values in the plants treated with EC 1.0 dS·m-1 among the EC treatments and flower color showed higher L* and b* values and lower a* values in the plants treated with EC 3.0 dS·m-1 compared to EC 1.0 and 2.0 dS・m-1. Nutrient solution of EC 1.0 dS·m-1 (EC111) can be recommended to improve flower spike quality and advanced flower development of Cymbidium.




초록


    Introduction

    Cymbidium is a popular floriculture plant in many countries. In Korea, it has a long flowering period of two to three months (from late October to early April) making it one of the most representative winter flowers (Kim et al. 2015). Cymbidium production area was 33 ha and sales amount 6.3 billion won in 2019 (MIFAFF 2018) and 51 pot plant cultivars were bred (Park et al. 2017) in Korea. Although Cymbidium was mainly produced in pot plants, some farms are switching their sales patterns to cut flowers as exports have declined. There has been also an increasing demand worldwide for Cymbidium cut flowers (CBI 2013). However, Cymbidium cut flowers were produced in the same cultivation method like pot plants in Korea.

    It is necessary to establish an appropriate production system to produce and export high-quality Cymbidium cut flowers. Cymbidium pot plants are shipped out at the third year after vegetative growth of 2-3 years, but cut flowers are harvested at the third year and shipped out for several years from the same plant (An et al. 2016). It is important to maintain continuous high-quality during the cut flower production. Market quality of the cut flowers is determined by spike production, spike length, flower numbers. It is also necessary to identify the appropriate age to continuously produce of high-quality Cymbidium cut flowers (Bill and Bruce 2012). Most of the studies of Cymbidium are focused on pot plant production in Korea, therefore research is also needed for the production and export of cut flowers. Several studies were reported about cultivation and postharvest management of Cymbidium cut flowers (An et al. 2015;An et al. 2016;Kim et al. 2017;Lee et al. 2012).

    According to Kim et al. (2011), minimum number of leaves and pseudobulb diameter were required for transition to the reproductive stage in Cymbidium. The increases of starch in leaves during vegetative growth and soluble sugars in pseudobulbs and roots during reproductive growth were significant for increasing plant growth and promoting flowering in C. ‘Red Fire’ (Kim et al. 2013). Therefore, appropriate nutrition would play an important role in Cymbidium considering the relationship of carbohydrate changes of leaf and pseudobulb and flowering. Nutrient supply of manipulated nutrient solution will be more effective for high quality spike production but there are not many studies about appropriate nutrient solution conditions. Sung et al. (1998) compared the effects of organic fertilizer and nutrient solution on Cymbidium young plants, and recommended nutrient supply with rockwool or peatmoss mixed media. Nurient solution of EC of 1.5 dS·m-1 showed the highest spike production and stem length than lower EC treatments (Won et al. 1998). De Kreij and Van den Berg (1990) reported that higher EC (1.4 dS·m-1) resulted in increased shoot production and spikes in C. Red Beauty ‘Del Rey’. More researches on various EC levels higher than 1.5 dS·m-1 of nutrient solution supply are needed for improved spike production of Cymbidium.

    The objectives of this study were to establish an appropriate production system to produce and export high-quality Cymbidium cut flowers and determine the appropriate electrical conductivity (EC) treatments of nutrient solution which gives the highest spike production and quality.

    Materials and Methods

    Plant materials and growth conditions

    Three-year-old plants of Cymbidium ‘Lovely Smile’ plants, bred by the National Institute of Horticultural and Herbal Science (NIHHS), were transported to the environmentally controlled Information and Communication Technology (ICT) smart greenhouse at Seoul Women’s University from a commercial greenhouse in Gongju (25 May 2020). Plants were grown in a 15 cm × 21 cm (diameter × height) plastic pot filled with bark (Seungjin bark, Seungjin fertilizer Co., Korea). The maximum and minimum temperatures inside the greenhouse were 34.3/17.5℃ in summer (from June to September) and 26.5/7.1℃ in winter (from October to January), which were monitored by data logger (SH-VT250, Soha-Tech Co. Ltd., Seoul, Korea). The maximum and minimum humidity were 94/28% in summer and 96/23% in winter. The maximum photosynthetic photon flux range was 52.0 - 838.5 μmol·m-2·s-1 in summer and 30.0 - 399.5 μmol·m-2·s-1 in winter.

    Electrical conductivity (EC) treatment of nutrient solution

    Plants were treated with water soluble Peters fertilizer 20N-20P-20K (Scotts, Inc., Marysville, Ohio). The EC of nutrient solution was changed in three distinct growth stages: vegetative stage (from May to July), flower initiation stage (from August to November), and flower development stage (from November). The EC treatments were 1-0-1 (dS·m-1, EC101), 1-1-1 (dS·m-1, EC111), 2-1-2 (dS·m-1, EC212), 2-2-2 (dS·m-1, EC222), 3-2-3 (dS·m-1, EC323), 3-3-3 (dS·m-1, EC333) and the pH was adjusted to 6.0-6.5 (Table 1). Plants were irrigated with 1 L of fertilizer solution to each pot (three times per week).

    Data collection

    Each treatment was tested with 10 pots. The leaf length and width, number of pseudobulb per plant, pseudobulb diameter, number of new shoots and spikes were measured every month for 28 weeks after nutrient solution treatment. The longest leaf from the base of the pseudobulb was used to represent the leaf length. The pseudobulb diameter was measured at the widest point of the largest pseudobulb using a digital caliper.

    Flower development period (flower bud and flowering stage) were recorded per flower spike. Total number of spikes were investigated per pot and pseudobulb. The stem length, stem thickness, number of flowers, days to flowering, and fresh weight were investigated at harvest of produced flower spikes (10 replicates). Spike length was determined from the base to the top of the flower and stem thickness was measured at the last basipetal node. The day at which the first three floret was fully open was regarded as flowering time and the days were calculated from the nutrient solution treatment to each flowering time. Flower diameter was measured with the average of three flowers per plant, from the margin of the left petal to that of the right petal. Petal color of the surface of three different petals from each plant was measured using a color meter (CR-10 Plus, Minolta Co., Tokyo, Japan) and recorded using the CIE (L*, a*, and b*) from uniform color space, in which the L* scale ranged from no reflection (L* = 0; black) to perfect diffuse reflection (L* = 100; white), the a* scale ranged from negative values for green to positive values for red, and the b* scale ranged from negative values for blue to positive values for yellow (Francis 1980). Flower diameter and petal color were measured of 5 replicates per treatment.

    Statistical analysis

    Statistical analysis were performed using SAS system for Windows version 9.4 (SAS Inst. Inc., Cary, NC, USA). Differences among treatment groups were assessed using Duncan’s multiple range tests. Graph module analyses were performed using Sigma Plot version 10.0 (Systat Software Inc., San Jose, CA, USA).

    Results and Discussion

    Plant growth affected by EC changes in nutrient solution of Cymbidium

    Leaf length and width, number of pseudobulb showed no significant differences according to the EC treatments at the end of the vegetative stage (Table 2). However, number of leaves decreased and pseudobulb diameter increased in the highest EC treatment (3-3-3). Leaf length increased in EC maintained treatments with no significant differences (EC111, EC222, and EC333). Pseudobulb diameter also increased in EC maintained Treatments.

    Pseudobulb diameter increased in the plants treated with EC 1.0 dS・m-1 (EC101 and EC111) compared to the values of vegetative stage at the reproductive stage 28 weeks after nutrient solution treatment (Table 3). But pseudobulb diameter of the plants treated with EC 2.0 - 3.0 dS・m-1 remained similar compared to the values of vegetative stage. Arnold and Van den Berg (1982) reported that nitrogen promoted vegetative growth but reduced the number of spikes per shoot. Good vegetative growth is needed but excessive nutrition inhibited reproductive growth in treatments of EC 2.0 - 3.0 dS・m-1 in this experiment. Leaf length and width, number of pseudobulb, number of spike showed no significant differences according to the EC treatments. Leaf length increased in EC maintained treatments with no significant differences (EC111, EC222, and EC333). Plants began to produce spikes from September. Number of spike increased in EC maintained treatments with no significant differences (EC111, EC222, and EC333).

    Flower spike production affected by EC changes in nutrient solution of Cymbidium

    Flower spike production per pot and pseudobulb showed the highest values in the plants treated with EC111 of 3.3 and 1.4 but there was no significant difference according to the treatments (Fig. 1). Nutrient solution of EC111 can be recommended to improve flower spike production of Cymbidium. Flower spike production per pot and pseudobulb increased in EC maintained treatments (EC111, EC222, and EC333). High level during vegetative growth and omitting fertilizer during generative bud emergence gave the highest yield in other studies (Arnold and Van den Berg 1983). But production of spikes in the level of EC 1.0 dS·m-1 showed increased values in maintained EC treatments in our experiment.

    Flower spikes of the plants treated with EC 1.0 dS·m-1 showed the highest values in stem length, stem thickness, and fresh weight of spikes (Fig. 2). Flower spikes of the plants treated with EC 3.0 dS·m-1 showed the worst spike quality. Stem length decreased in EC maintained treatments (EC111, EC222, and EC333). According to De Kreij et al. (1990), a higher EC (1.4 dS·m-1) gave a greater spike production per m2, a lower spike production per shoot, a shorter spike and more flowers per m2 than lower EC (0.6 and 1.0 dS·m-1). The plants treated with EC 1.0 dS·m-1 also showed the highest values in number of flowers and flowered more earlier than other treatments (Fig. 3). Nutrient supply of EC 1.0 dS·m-1 produced more flower spikes with increased plant characteristics, but higher or maintained EC treatments decreased stem length like the previous study.

    Flower development period (flower bud and flowering stage) treated with treatments of EC101, 111 and 212 took place 1 - 2 weeks earlier than the other treatments (Fig. 4). Flower buds developed mainly 22 - 26 weeks after nutrient solution treatment with treatments of EC101, 111, and 212 and that of EC222, 323, and 333 developed 24 - 26 weeks. Flowers developed mainly 30 - 33 weeks after nutrient solution treatment with treatments of EC101, 111, and 212 and that of EC 222, 323, and 333 developed 31 - 33 weeks. Production of total spikes were 18 (EC101), 22 (EC111), 13 (EC212), 13 (EC222), 10 (EC323), 10 (EC333) at the end of the experiment for 10 pots (data not shown). Omitting fertilizer at the stage of generative bud emergence resulted in earlier flowering and harvest compared with continuous fertilization in other studies (Arnold and Van den Berg 1984; Van Os and Van der Wurff 1988a). There was only difference in flower development period according to the EC levels, and fertilization methods of EC treatments showed no distinguished phenomenon in this experiment.

    Flower diameter showed the highest values in treatments of EC 1.0 dS・m-1 and flower color showed higher L* and b* values and lower a* values in treatments with EC 3.0 dS・m-1 compared to them with EC 1.0 - 2.0 dS・m-1 (Table 5). Coloration is a important factor determined the quality of cut flowers. Especially high a* values appeared in vivid reddish coloration and total anthocyanin content in Rosa flowers with red or pink petals (Biolley and Jay 1993; Schmitzer et al. 2009). Red coloration increased more under EC 1.0 - 2.0 dS・m-1 treatments represented by higher a* values. Flower diameter decreased in EC maintained treatments (EC111, EC222, and EC333) and b* values showed an increasing tendency. Higher and maintained EC treatments decreased the flower quality in this experiment.

    Nutrient solution of EC 1.0 dS·m-1 can be recommended to improve plant growth and flowering and EC111 was the most appropriate treatment considered the spike production of Cymbidium. EC maintained treatments increased spike production but spike quality characteristics associated with stem length, flower diameter, flower color were decreased. Most studies of Cymbidium about the EC levels of nutrient solution supply of were performed in the level of 0 - 1.5 dS・m-1, and 1.5 dS・m-1 were mainly recommended for improved plant growth and spike production (Van den Berg 1990; Won et al. 1998). Thus we conducted an experiment to determine the effectiveness of higher EC level but there were no increasement on spike production in higher EC levels. Treatments with omitted (April - July) nutrient supply of 2.5 dS·m-1 were reported for higher spike production in previous study of Van Os and Van der Wurff (1988b). Excessive nutrition inhibited reproductive growth in treatments of EC 2.0 - 3.0 dS・m-1 in this experiment, and therefore more research will be needed for the relation between EC level and supply period of the nutrient solution in Cymbidium.

    Acknowledgments

    This work was carried out with the support of “Cooperative Research Program for Agriculture Science and Technology Development (Project No. PJ015024)” Rural Development Administration, Korea and “Seoul Women’s University research funds (2021-0105)”.

    Figure

    FRJ-29-4-232_F1.gif

    Effects of electrical conductivity changes of the nutrient solution on production of total spikes per pot and pseudobulb of Cymbidium 'Lovely Smile' at the end of the experiment. Error bars represent means ± SD (n = 10).

    FRJ-29-4-232_F2.gif

    Effects of electrical conductivity changes of the nutrient solution on harvested spike characteristics of Cymbidium ‘Lovely Smile’. All the values are mean of 10 replicates. Data were collected 30 - 33 weeks after nutrient solution treatment. Mean separation within columns by Duncan’s multiple range test (p < 0.05).

    FRJ-29-4-232_F3.gif

    Effects of electrical conductivity changes of the nutrient solution on harvested flower characteristics of Cymbidium ‘Lovely Smile’. All the values are mean of 10 replicates. Data were collected 30 - 33 weeks after nutrient solution treatment. Mean separation within columns by Duncan’s multiple range test (p < 0.05).

    FRJ-29-4-232_F4.gif

    Effects of electrical conductivity changes of the nutrient solution on flower development period (flower bud and flowering stage) of Cymbidium ‘Lovely Smile’. All the values are mean of 10 replicates.

    Table

    Electrical conductivity changes of the nutrient solution according to the growth stages during the experiment.

    Effects of electrical conductivity changes of the nutrient solution at vegetative plant growth stage of Cymbidium ‘Lovely Smile’. Data were collected 8 weeks after nutrient solution treatment. All the values are mean of 10 replicates.

    Effects of electrical conductivity changes of the nutrient solution at reproductive plant growth stage of Cymbidium ‘Lovely Smile’. Data were collected 28 weeks after nutrient solution treatment. All the values are mean of 10 replicates.

    Effects of electrical conductivity changes of the nutrient solution on flower diameter and petal color of harvested Cymbidium ‘Lovely Smile’ spikes. All the values are mean of 5 replicates. Data were collected 30 - 33 weeks after nutrient solution treatment.

    Reference

    1. An HR , Kim YJ , Park YJ , Kim KS (2015) Night interruption improves subsequent cut flower quality in Cymbidium ‘Red Fire’. Hortic Environ Biotechnol 56:455-461
    2. An HR , Kwon OK , Park PH , Park PM , Baek YS (2016) Cut flower yield and quality of Cymbidium according to different cultivation periods and pot sizes. Flower Res J 24:212-216
    3. Arnold BR , Van den Berg TJM (1982) Stikstof-en kalibemesting bij mini-cymbidium. Bedrijfsontwikkeling 13:562-563
    4. Arnold BR , Van den Berg TJM (1983) N-gift afstemmen op bloemtak/scheutverhouding. Vakbl Bloemisterij 38:42-43
    5. Arnold BR , Van den Berg TJM (1984) Effect of substrate and nitrogen on yield and quality of mini-cymbidium. Acta Hortic 150:289-295
    6. Bill M , Bruce W (2012) The cymbidium market ist boomingwhich means more choices than ever before. Accessed Jun. 2016, https://www.myteleflora.com/uploadedFiles/Contents/Design_Education/Floral_Publication_Collection/Flowers-And_Article_Archive/Cymbidiums-Mar11.pdf
    7. Biolley JP , Jay M (1993) Anthocyanins in modern roseschemical and colorimetric features in relation to the color range. Exp Bot 44:1725-1734
    8. De Kreij C , Van den Berg TJM (1990) Effect of electrical conductivity of the nutrient solution and fertilization regime on spike production and quality of Cymbidium. Sci Hortic 44:293-300
    9. Kim SY , An HR , Baek YS , Ramya M , Park PH (2017) Effects of preservatives on vase life of cut Cymbidium flowers bred in Korea. Flower Res J 25:70-76
    10. Kim YJ , Lee HJ , Kim KS (2011) Night interruption promotes vegetative growth and flowering of Cymbidium. Sci Hortic 130:887-893
    11. Kim YJ , Lee HJ , Kim KS (2013) Carbohydrate changes in Cymbidium ‘Red Fire’ in response to night interrruption. Sci Hortic 162:82-89
    12. Lee YR , Choi SR , Yae BW , Lee DS (2012) Analysis of cut flowers vase life to pot Cymbidium cultivars. Flower Res J 20:40-44
    13. Ministry of Food, Agriculture, Forestry and Fisheries (MFAFF) (2020) 2019 status of cultivation in flower crops. In: MFAFF (ed) Korea, p 24
    14. Park PH , An HR , Park PH , Lee SY (2017) Breeding cultivars Cymbidium. In: National Institute of Horticultural and Herbal Science (NIHHS) (ed) Korea, pp 4-52
    15. Schmitzer VR , Veberic R , Osterc G , Stampar F (2010) Color and phenolic content changes during flower development in groundcover rose. J Am Soc Hortic Sci 135:195-202
    16. Sung MS , Ko SB , Park YC , Kang HJ , Ko TS , Chung SK (1998) Effects of hydroponic media on the growth of young plants western Cymbidium. Korean J Hortic Sci Tech 16:461
    17. Van OS PC , Van der Wurff AAM (1988a) Temperatuur en EC bepalen produktie, kwaliteit en vroegheid. Vakbl Bloemisterij 43:48-49
    18. Van OS PC , Van der Wurff AAM (1988b) Produktiviteit Cymbidium afhankelijk van bloemtak/ scheutverhouding. Vakbl Bloemisterij 43:50-51
    19. Won JY , Lee YR , Kim MS , Jeoung MI , Kim BH , Song CH (1998) Effects of nutrient solution level and potting media on the growth and flowering of Cymbidium Show Girl ‘Huskey Honey’. Korean J Hortic Sci Tech 16:124
    
    1. SEARCH
    2. Journal Abbreviation : 'Flower Res. J.'
      Frequency : Quarterly
      Doi Prefix : 10.11623/frj.
      ISSN : 1225-5009 (Print) / 2287-772X (Online)
      Year of Launching : 1991
      Publisher : The Korean Society for Floricultural Science
      Indexed/Tracked/Covered By :

    3. Online Submission

      submission.ijfs.org

    4. Template DOWNLOAD

      국문 영문 품종 리뷰
    5. 논문유사도검사

    6. KSFS

      Korean Society for
      Floricultural Science

    7. Contact Us
      Flower Research Journal

      - Tel: +82-54-820-5472
      - E-mail: kafid@hanmail.net